Owner’s Manual
PS/2 Keyboard
and Mouse Emulator
Model #: B012-000
This package contains:
• 1 B012-000 PS/2 Keyboard
and Mouse Emulator
• 1 User Manual
Tripp Lite World Headquarters
1111 W. 35th Street, Chicago, IL 60609 USA
Note: Follow these instructions and operating procedures to ensure correct performance and to prevent damage
to this unit or to its connected devices.
Copyright © 2006 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.
The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.
Installation
Installation simply entails plugging the cables into their appropriate sockets as shown in
the diagrams below:
Troubleshooting
Problem
Cause
Action
Erratic operation
Static electricity may
cause the unit to
Unplug the B012-000’s cables from
the computer’s keyboard and mouse
ports, then reinsert them.
operate erratically.
Specifications
Function
Specification
Connectors
Keyboard
Mouse
1 x 6 pin mini-din F (to keyboard)
1 x 6 pin mini-din M (to computer)
1 x 6 pin mini-din F (to mouse)
1 x 6 pin mini-din M (to computer)
LEDs
2
Switches
Cable Length
1 x Remote wake up push button
30 cm
Operating Temperature
Storage Temperature
Humidity
0 ~ 50° C
-20 ~ 60° C
0 ~ 80% RH
Plastic
Housing
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of
one (1) year from the date of initial purchase. TRIPP LITE's obligation under this warranty is limited to
repairing or replacing (at its sole option) any such defective products. To obtain service under this
warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an
authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP
LITE service center with transportation charges prepaid and must be accompanied by a brief description
of the problem encountered and proof of date and place of purchase. This warranty does not apply to
equipment, which has been damaged by accident, negligence or misapplication or has been altered or
modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid
limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF
THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP
LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of
equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.
Warranty Registration
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Subpart J of Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Tripp Lite World Headquarters
1111 W. 35th Street, Chicago, IL 60609 USA
200607163 93-2578
|